English
DeutschHow to install children's safety guardrail
1. Prepare the tools and materials needed to install the guardrail, such as straight pipe connecting rods and elbow connecting rods, as well as holders and supporting feet, Velcro, fixing screws, etc.
2. Then take out the retainer and fix it to the state of ninety degrees.
3. Then insert the fixing screw into the positioning hole, and then fix it with the matching nut.
4. Take out the supporting feet and insert them into the corresponding holders, and fix the locks.
5. Then take out the two elbow connecting rods and connect the middle ends.
6. Afterwards, use Oxford mesh cloth to cover the elbow connecting rod, and connect the elbow connecting rod to the holder.
7. Then fix the spring buckle and level the Oxford mesh.
8. Take out the two straight pipe connecting pipes, fasten the spring buckle, and then pass the straight pipe connecting rod through the connecting seam under the mesh.
9. Then insert one end of the interface into the positioning joint of the holder and fix it, press the other end of the connecting rod spring buckle, and push the sleeve back inward.
10. Insert the fixer into the positioning joint and pull out the locking buckle, and put the completed bed guardrailunder the mattress and press it tightly.
11. Finally, you can install the bed rails on the bed by lifting the holders on both sides online.
The installation steps of the children's bed guardrail are introduced, but in addition, there are some other things to pay attention to when installing the children's bed! Let's introduce it to everyone!
The installation of the guardrail of the crib is not difficult, as long as the installation is carried out according to the above instructions, the guardrail of the crib can be safely installed. But after all, it is something for children, so you must take the details seriously, and you can't make the slightest problem, so as to ensure the safety of the crib and the child.
